The Edco PHC Series is designed to protect two pairs of wires specifically for alarm and security systems where operating currents can be as high as 5 Amps. Electrically, the Edco PHC Series is a rugged series hybrid implementing a staged complement of MOVs, copper wound inductors and Silicon Avalanche Diodes. This design reduces series resistance to 0.2 ohms per pair. These products are intended to mate with an Edco PCB1B-WKEY gold-plated female terminal connector.
The Edco PHC modules plug into a base assembly (Edco PCB1B-WKEY). The base assembly can be mounted to any flat surface and should be located as close as practical to the protected equipment. Terminal 1 and/or terminal 10 should be connected to Building-Approved Ground with 12 or 10 gauge solid wire.
- Terminal Block receptacles for flexible connectivity and placement
- Installing a surge protector gives you peace of mind
Name : Schneider Electric 172 100 Series Modular Signaling Circuit Protector, 70VDC, 100VDC, Two-Pair (PHC-SP70) , Schneider Electric
Category : Surge Protection Modules
UPC Code : 630898004509
Country of Origin : Mexico. Country of origin is subject to change.
ADI Part Number : EL-PHCSP70
Brand Name : ASCO
Manufacturer : Schneider Electric SA
Manufacturer Part Number : PHCSP70
Product Model : PHC-SP70
Product Name : Two-Pair Signaling Circuit Protector (Modular)
Product Series : PHC
Product Type : Surge Suppressor/Protector
Weight (Approximate) (g) : 226.796
Output Voltage : 70 V DC
Output Voltage (V DC) : 70
Receptacles : Terminal Block
Depth : 2.4"
Depth (mm) : 60.452
Height : 3.7"
Height (mm) : 93.98
Weight (Approximate) : 8 oz
Width : 1.8"
Width (mm) : 44.45
Input Voltage : 70 V DC
Input Voltage (V DC) : 70
Limited Warranty : 5 Year