The SL-350QN is a 100m outdoor active infrared (AIR) beam set, wired which is designed for perimeter security. It can also be connected to an IP network when used in conjunction with our IP/POE module, the PIE-1.
A perfect alignment between transmitter and receiver is key to optimise the operation of the active beams. To make the optical alignment easier, the SL-350QN chassis features vivid yellow colours to be seen from the distance. Additionally, the "Sniper Viewfinder" is a new telescope lens which gives a high level of visibility for optical alignment work. Even over long distances, a perfect installation and stable performance can be achieved in a short period.
IP65 rated, the SL-350QN housing has been designed to resist against both water and dust. The two hoods featured on the front cover are positioned over the upper and lower beam to prevent frost from attaching to the cover and potentially affecting the signal power. The housing is made of UV resistant polycarbonate material to avoid deterioration caused by ultraviolet rays, whilst maintaining good transparency for the infrared beams over time.
- Roof / Ceiling
- High grade aspherical lenses
- Two "easy-alignment" tools
- Non-stackable mode
Name : Optex SL-350QN SL Series 350 ft. Outdoor Quad Beam with Form C Relay Output, Standard Grade , Optex
Category : Photoelectric Beam Detectors
UPC Code : 788924088099
Country of Origin : China. Country of origin is subject to change.
ADI Part Number : OP-SL350QN
Brand Name : Optex
Manufacturer : Optex, Inc
Manufacturer Part Number : SL-350QN
Product Line : SmartLine
Product Model : SL-350QN
Product Name : SmartLine SL-350QN Photoelectric Beam Detector
Product Series : SL-QN
Product Type : Photoelectric Beam Detector
Weight (Approximate) (g) : 2400
Beam Configuration : Quad Beam
Material : Polycarbonate
Maximum Outdoor Detection Range : 350 ft
Maximum Outdoor Detection Range (mm) : 106680
Number of Channels : 4
Connectivity Technology : Cable
Depth : 3.8"
Depth (mm) : 96
Form Factor : Pole-mountable, Wall Mountable
Height : 17.6"
Height (mm) : 448
Product Material : Polycarbonate
Weight (Approximate) : 5.29 lb
Width : 3.1"
Width (mm) : 79
Input Current : 40 mA
Input Current (A) : 0.04
Input Voltage : 10.5 V DC, 30 V DC
Input Voltage (V DC) : 10.5, 30
Power Source : AC Supply
Features : Anti-frost System, Dust Proof, Water Proof