Name: Marshall RS7-HR Rack Mountable RS232/RS422 Distribution Box for up to Pan Tilt Zoom Cameras
Brand: Marshall Electronics
SKU: 99-RS7HR
Price: $0.00

Marshall RS7-HR Rack Mountable RS232/RS422 Distribution Box for up to Pan Tilt Zoom Cameras

Brand: Marshall Electronics

ADI #:99-RS7HR Model #: RS7-HR Name: Marshall RS7-HR Rack Mountable RS232/RS422 Distribution Box for up to Pan Tilt Zoom Cameras

Splits one Cat (RJ45) control cable to 7 cameras via Home Run.
Easy and clean setup from Marshall Controllers (VS-PTC-IP, VS-PTC-200) and others.
Extends usable RS232 Cat cable runs for control of cameras to 100m from controller to RS7-HR box and another 100m to each of seven camera locations (200m total). Using RS422 its extends (300m + 300m for a total of 600m).

Product Overview

RS7-HR CONNECTION

The RS7-HR can be set on a desk top or you can use the included 1RU rack ears to install a rack. Please note the following:

Before connecting your equipment please select RS232 or RS422 on the back of the unit
Connect your controller to the Input connection on the front of the RS7-HR using a Cat 5/6 cable
On the back of the RS7-HR connect your Cat 5/6 cables from the RS7-HR to each camera (you may need optional CV620-CABLE-07 Adapters for RS232)
You will now connect power to the RS7-HR, you will see a red indicator light appear on the front of the unit, now you will push the refresh button once
If you disconnect a camera or add a camera you will need to push the refresh button again

General Information

Name : Marshall RS7-HR Rack Mountable RS232/RS422 Distribution Box for up to Pan Tilt Zoom Cameras , Marshall Electronics
Category : Video Conference Interface Units
UPC Code : 801813225884
Country of Origin : Taiwan. Country of origin is subject to change.