Control Panel Modules
Filter Results
Showing 1 - 28 of 240
content loaded
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
SK-MONITOR|SK-MONITOR
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
SK-CONTROL|SK-CONTROL
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
CRF-300FL-CRF300
Key Features
- 15 to 32V DC
- Built-in type identification automatically identifies these devices to the control panel
- Internal circuitry and relay powered directly by two-wire SLC loop
Sign In for Dealer Pricing
Sign In for Dealer Pricing
MMF-300FL-MMF300
Key Features
- 15 to 32V DC
- Built-in type identification automatically identifies this device as a monitor module to the control panel.
- Powered directly by two-wire SLC loop. No additional power required.
Sign In for Dealer Pricing
Sign In for Dealer Pricing
MMF-301FL-MMF301
Key Features
- 15-32V DC
- Supervises a Style B (Class B) circuit of dry-contact input devices
- Compact design allows mounting in a single-gang box behind the device it monitors
Sign In for Dealer Pricing
Sign In for Dealer Pricing
SK-RELAYSK-RELAY
Key Features
- Two sets of Form C contacts
- Rotary address switches for fast installation
- Relay programming is completely flexible – can be mapped to zone conditions
Sign In for Dealer Pricing
Sign In for Dealer Pricing
SK-MONITORSK-MONITOR
SK-MONITOR|SK-MONITOR
Key Features
- Single contact monitor
- Support for Class A and Class B wiring
- Fully supervised
Sign In for Dealer Pricing
Sign In for Dealer Pricing
MDF-300FL-MDF300
Key Features
- Provides Two Independent Two Wire Initiating Device Circuits at Two Separate, Consecutive Addresses
- Capable of Monitoring Normally Open Contact Fire Alarm and Supervisory Devices
- Module has a Single Panel Controlled LED
Sign In for Dealer Pricing
Sign In for Dealer Pricing
SK-MINIMONSK-MINIMON
Key Features
- Single contact monitor
- Support for Class B (Style B) contact monitor wiring
- Small and lightweight size allows for flexible mounting options
Sign In for Dealer Pricing
Sign In for Dealer Pricing
CMF-300FL-CMF300
Key Features
- CMF-300 may be used to switch 24V NAC power
- A trouble condition on the external power supplyWill never interfere with the rest of the system
- Built-in type identification automatically identifies this device to the control panel
Sign In for Dealer Pricing
Sign In for Dealer Pricing
PAD100-SIMPL-PAD100SIM
Key Features
- 1 Class B monitoring input
- SLC Class A, Class X and Class B
- Mounts in a standard 4" or double gang box
Sign In for Dealer Pricing
Sign In for Dealer Pricing
SLC-3LSFL-SLC3LS
Key Features
- Optional card that provides the ES-1000X Series Fire Alarm Control Panels with additional SLC communication loops
- A maximum of two SLC3-LS cards may be installed on the Fire Alarm Control Panel
- Offering a total of 3 SLC loops and 954 points in the system
Sign In for Dealer Pricing
Sign In for Dealer Pricing
SK-CONTROLSK-CONTROL
SK-CONTROL|SK-CONTROL
Key Features
- Flexible solution for adding notification circuits where needed
- Rotary address switches for fast installation
- Support for Class B (Style Y) or Class A (Style Z) wiring
Sign In for Dealer Pricing
Sign In for Dealer Pricing
MMF-302FL-MMF302
Key Features
- MMF-300(A) is a standard-sized module that supervises either a Style D (Class A) or Style B (Class B) circuit of dry-contact input devices.
- MMF-301(A) is a miniature monitor module a mere 1.3" (3.302cm) used to supervise a Style B (Class B) circuit of dry-contact input devices.
- MMF-302(A) is a standard-sized module used to monitor and supervise compatible two-wire, 24 volt, smoke detectors on a Style D (Class A) or Style B (Class B) circuit.
Sign In for Dealer Pricing
Sign In for Dealer Pricing
MMF-300-10FL-MMF30010
Key Features
- Ten Addressable Class B or Five Addressable Class a Initiating Device Circuits
- Status Indicators for Each Point
- Flex Mounting Options
Sign In for Dealer Pricing
Sign In for Dealer Pricing
GSA-CC1SED-GSACC1S
Key Features
- Provides UL 1971-compliant auto-sync output for visual signals
- Functions as an audible signal riser selector
- Built-in ring-tone generator
Sign In for Dealer Pricing
Sign In for Dealer Pricing
SLC-2LSFL-SLC2LS
Key Features
- Easy mount chassis
- Large enclosure allows 18 A-hour batteries
- 7 A switching power supply
Sign In for Dealer Pricing
Sign In for Dealer Pricing
W-MMFFL-WMMF
Key Features
- Cascading Mesh Wireless Technology
- Any wireless device can be added to act as a repeater
- Standard-sized module that supervises either a Style D or Style B circuit of dry-contact input devices
Sign In for Dealer Pricing
Sign In for Dealer Pricing
MMF-302-6FL-MMF3026
Key Features
- Transmits the status of a zone of two-wire detectors to the fire alarm control panel.
- Six addressable Class B or three addressable Class A initiating device circuits.
- Status conditions are reported as normal, open, or alarm.
Sign In for Dealer Pricing
Sign In for Dealer Pricing
SA-USBED-SAUSB
Key Features
- USB 2.0 connection
- Designed for printers or PC communications
- Compatible with USB-compatible printers
Sign In for Dealer Pricing
Sign In for Dealer Pricing
GSA-IM2ED-GSAIM2
Key Features
- Signature Series Isolator Module model GSA-IM2
Sign In for Dealer Pricing
Sign In for Dealer Pricing
ANSZM4B2AED-ANSZM4B2A
Key Features
- Meets NFPA 72 Emergency Voice Alarm requirements
- Easy to use custom configuration software
- Clean dead-front construction
Sign In for Dealer Pricing
Sign In for Dealer Pricing
GSA-CT1ED-GSACT1
Key Features
- Multiple applications
- GSA-CT1HT rated for high temperature environments
- Plug-in (UIO) or standard 1-gang mount
Sign In for Dealer Pricing
Sign In for Dealer Pricing
GSA-CC1ED-GSACC1
Key Features
- Single and Dual input (riser) select
- Ring-tone generator
- Plug-in (UIO) or standard 2-gang mount
Sign In for Dealer Pricing
Sign In for Dealer Pricing
GSA-MABED-GSAMAB
Key Features
- Universal Class A/B Modules.
- Gather analog information from the slave devices connected to them and convert this into digital signals.
- Part of the UIO family of plug-in Signature Series modules.
Sign In for Dealer Pricing
Sign In for Dealer Pricing
GSA-CRED-GSACR
Key Features
- Provides one no/nc contact (GSA-CR/MCR)
- Allows group operation of sounder bases
- Plug-in (UIO) or standard 1-gang mount
Sign In for Dealer Pricing
Sign In for Dealer Pricing
FX-NACED-FXNAC
Key Features
- Analog NAC Module- Connects a supervised output circuit to a signal riser.
Sign In for Dealer Pricing
Sign In for Dealer Pricing
FX-IDC2BED-FXIDC2B
Key Features
- Analog Dual Input Module- Connects two normally open, alarm, supervisory, or monitor type dry contact initiating device circuits to the FireworX control panel.
Sign In for Dealer Pricing
Sign In for Dealer Pricing
FX-RLYED-FXRLY
Key Features
- Class A-B Two-Wire Module- Acts as an interface between conventional two-wire smoke detectors and the FireworX control panel.
- Analog Class A Single Input Module- Used to connect a normally open, alarm, supervisory, or monitor type dry contact initiating device circuit to the FireworX control panel.
- Analog Dual Input Module- Connects two normally open, alarm, supervisory, or monitor type dry contact initiating device circuits to the FireworX control panel.
Sign In for Dealer Pricing
Sign In for Dealer Pricing
GSA-UIO6ED-GSAUIO6
Key Features
- Modular flexibility:Wide assortment of multi-function plug-in modules provides total flexibility.
- MinimumWiring requirements: Integral jumpers between modules allow sharing of risers to reduce installationWiring.
- Easy installation: #12 AWG (2.5 mm2) terminal blocks and sturdy mounting pads ensure quick installation into Kidde enclosures.
Sign In for Dealer Pricing
Sign In for Dealer Pricing