Adams Rite by ASSA ABLOY
Filter Results
Showing 57 - 84 of 815
content loaded
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
7140-515-628-00|R8-714051562
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
FPK45-628R8-FPK45628
Key Features
- 7100 Series Electric Strike Faceplate Kit
- Clear Anodized Finish
Sign In for Dealer Pricing
Sign In for Dealer Pricing
7160-310-335-00R8-716031033
Key Features
- Bolt retaining keeper is stainless steel. Strike location must be centered on latchbolt
- Basic strike has lip of proper length for 1-3/4 [44.5 mm] thick door that closes flush with jamb edge.
Sign In for Dealer Pricing
Sign In for Dealer Pricing
8803-36R8-880336
Key Features
- Push bar made of extruded aluminum
- clad or anodized in a variety of finishes.
Sign In for Dealer Pricing
Sign In for Dealer Pricing
4300-20-202-313R8-432020231
Key Features
- Dark Bronze Anodized Finish
- Aluminum construction
- Field-selectable voltage operation to match power source of 12 or 24V AC/DC
Sign In for Dealer Pricing
Sign In for Dealer Pricing
7140-510-628-00R8-714051062
Key Features
- Bolt retaining keeper is stainless steel
- Flat with square corners architectural finish
- Basic strike has lip of proper length for 1-3/4" [44.5 mm] thick door that closes flush with jamb edge
Sign In for Dealer Pricing
Sign In for Dealer Pricing
8611-36R8-861136
Key Features
- The 8600 Series Narrow Stile Concealed Vertical Rod Exit Device is designed for narrow stile aluminum applications that require a life-safety exit device with concealed vertical rods for two-point locking.
- Designed for use in applications with single doors or pairs of doors.
- Door Thickness: Suits 1-3/4" [44.5 mm] standard, up to 2-1/4"[57.2 mm]. Device requires modification when used with cylinder in doors over 1-3/4" [44.5 mm].
Sign In for Dealer Pricing
Sign In for Dealer Pricing
4510-25-101-313R8-45122511
Key Features
- Dark Bronze Anodized Finish
- Aluminum construction
- LH or RHR - handed operation is reversible without special tools required
Sign In for Dealer Pricing
Sign In for Dealer Pricing
7401-130R8-7401130
Key Features
- Bolt retaining keeper is stainless steel.
- Basic strike has lip of proper length for 1-3/4" [44.5 mm] thick door that closes flush with jamb edge.
- Opens under 35 lbs of pre-load
Sign In for Dealer Pricing
Sign In for Dealer Pricing
8099-M2-3036-32DR8-8099M232D
Key Features
- Push bar made of extruded aluminum
- clad or anodized in a variety of finishes.
- 36" width
Sign In for Dealer Pricing
Sign In for Dealer Pricing
8800EL36-32DMEC-24R8-8800EL36E
Sign In for Dealer Pricing
Sign In for Dealer Pricing
4510-16-201-628R8-451016201
Key Features
- Clear Anodized Finish
- Aluminum construction
- RH or LHR - handed operation is reversible without special tools required
Sign In for Dealer Pricing
Sign In for Dealer Pricing
7140-515-628-00R8-714051562
7140-515-628-00|R8-714051562
Key Features
- Clear Anodized Finish
- Aluminum construction
- Grade 1 strength
Sign In for Dealer Pricing
Sign In for Dealer Pricing
7400M628R8-7400M628
Key Features
- Basic 7400 strike has lip of proper length for 1.75" (44.5mm) thick door that closes flush with jamb edge
- Lip extension kits not available on 7401, 7431
- 7400 Series Electric Strikes open electrically under 25 lb (11.3kg) of preload
Sign In for Dealer Pricing
Sign In for Dealer Pricing
4300-20-1RPR8-4300201RP
Key Features
- Case: Steel with corrosion-resistant plating. Measures 15/16 x 5-13/16 x depth [23.8 mm x 147.6 mm x depth]. Depth varies by backset.
- Strike: Pick from optional strikes. 4304 no-cutsurface mounted strike for easy retrofits. Specify 4901-01 mortised-flush versionWhen covering existing MS deadlock preparation or for new applications. 4901-02 strike is available with radius profiles for pairs of doors and with extended lips of center-hung or thick door applications.
- Auxiliary Bolt: All metal. Deadlocks latchbolt to prevent “loiding” or case-knife entry
Sign In for Dealer Pricing
Sign In for Dealer Pricing
4591-04-00-628R8-459104006
Key Features
- Highly secured to door stile with special binder posts that extend into the escutcheon to rigidly resist torque loads in any direction
- The 4591 Deadlatch Paddle is an Ergonomically Friendly
- An Alternative to Knob or Lever Handles Makes Opening a Latched Door as Natural as Opening an Unlatched One Just Push or Pull in the Direction the Door Swings
Sign In for Dealer Pricing
Sign In for Dealer Pricing
4510-15-101-628R8-451015101
Key Features
- Cylinder Backset: 7/8 [22.2 mm], 31/32 [24.6 mm], 1-1/8 [28.6 mm] or 1-1/2 [38.1 mm].
- Case: Steel with corrosion-resistant plating. Measures 1 x 5-13/16 x depth [25.4 mm x147.6 mm x depth]. Depth varies by backset.
- Bolt Holdback: While bolt is held fully retracted, a reverse turn of the key retains the bolt, allowing the door to be free swinging.
Sign In for Dealer Pricing
Sign In for Dealer Pricing
7170-340-628-00R8-717034062
Key Features
- Suitable for use on timber and steel doors
- 907kg holding force (2000 lbs)
- Facility to change duty from fail-safe to fail secure and vice versa
Sign In for Dealer Pricing
Sign In for Dealer Pricing
7100-315-628-00R8-710031562
Key Features
- Aluminum construction,Clear Anodized Finish
- Provides electrical remote control, allowing door to open without depressing the panic hardware cross bar
- Stainless Steel Split-Jaw is included with 5/8" x 1-7/16" x 1/2" deep strike opening
Sign In for Dealer Pricing
Sign In for Dealer Pricing
7100-540-628-00R8-710054062
Key Features
- Bolt retaining keeper is stainless steel.
- Basic strike has lip of proper length for 1-3/4" [44.5 mm] thick door that closes flush with jamb edge.
- 24V AC Intermittent voltage operation
Sign In for Dealer Pricing
Sign In for Dealer Pricing
7140-540-628-00R8-714054062
Key Features
- Bolt retaining keeper is stainless steel.
- Basic strike has lip of proper length for 1-3/4" [44.5 mm] thick door that closes flush with jamb edge.
- Grade 1 strength
Sign In for Dealer Pricing
Sign In for Dealer Pricing
4591-04-00-313R8-459104313
Key Features
- Paddle: Extruded aluminum.
- Escutcheons: Zinc alloy with black finish. Secured to door stile with special binder posts that extend into the escutcheon to rigidly resist torque loads in any direction.
- Cam Plug: Furnished for use with 4300, 4500 and 4900 Series Deadlatches. Cam plug not for use with MS+1890 Deadlock/Deadlatch or 2190/2290 Interconnected Deadbolt/Deadlatch. Secured in latch body by cylinder set screw, plug is also rigidly tied to escutcheon by hardened steel pins.
Sign In for Dealer Pricing
Sign In for Dealer Pricing
4900-35-101-628R8-490035101
Key Features
- Case: Steel with corrosion-resistant plating. Measures 7/8" x 5-13/16" x depth [22.2 mm x 147.6 mm x depth]. Depth varies by backset. Screw-fastened tube spacer brackets allow for cleaner removalWhen tab mounting.
- Bolt Holdback: While bolt is held fully retracted, a reverse turn of the key retains the bolt, allowing the door to be free swinging.
- Cylinder Backset: 31/32" [24.6 mm], 1-1/8" [28.6 mm], or 1-1/2" 38.1 mm].
Sign In for Dealer Pricing
Sign In for Dealer Pricing
8233LR36R8-8233LR36
Key Features
- Black Anodized Pushbar Finish
- Pushbar Length: 36"
- Bar Height: Standard model adjusts from 30" to 44"
Sign In for Dealer Pricing
Sign In for Dealer Pricing
7430-628R8-7430628
Key Features
- Basic 7400 strike has lip of proper length for 1-3/4" [44.5 mm] thick door that closes flush with jamb edge.
- Bolt retaining keeper is stainless steel
- Strike accepts bolt of Adams Rite 4500, 4700 (discontinued), or 4900 Deadlatch or cylindrical locksets.
Sign In for Dealer Pricing
Sign In for Dealer Pricing
7400AR8-7400A
Key Features
- Bolt retaining keeper is stainless steel.
- Basic strike has lip of proper length for 1-3/4" [44.5 mm] thick door that closes flush with jamb edge.
- Grade 1 strength
Sign In for Dealer Pricing
Sign In for Dealer Pricing
7131-540-628-00R8-713154628
Key Features
- Clear Anodized Finish
- Aluminum construction
- 24V AC Intermittent voltage operation
Sign In for Dealer Pricing
Sign In for Dealer Pricing
4591-02-00-335R8-459120335
Key Features
- Black Anodized Finish
- Cast aluminum construction
- Standard Paddle
Sign In for Dealer Pricing
Sign In for Dealer Pricing
4900-45-101-628R8-490045106
Sign In for Dealer Pricing
Sign In for Dealer Pricing