Product Overview
Models SD365 and SD365-IV are plug-in type smoke sensors that combine a photoelectronic sensing chamber with addressable-analog communications. The sensors transmit an analog representation of smoke density over a communication line to a control panel. Rotary dial switches are provided for setting the sensor’s address. SD365-IV will support either LiteSpeed or CLIP (Classic Loop Interface Protocol) mode. The possible features available if supported by the control panel are: 1. The sensor’s LEDs can operate in three ways—on, off, and blinking–and they can be set to red, green, or amber. This is controlled by the panel. 2. The remote output may be synchronized to the LED operation or controlled independent of the LEDs. 3. Devices are point addressable up to 159 addresses.
General Information
Name : Fire-Lite SD365-IV Addressable Photoelectric Smoke Detector, LiteSpeed and CLIP, Ivory (Replaces SD355) , Fire-Lite Alarms by Honeywell
Category : Smoke Detectors
UPC Code : 783863051753
Country of Origin : Mexico. Country of origin is subject to change.
Specifications
General Information
ADI Part Number : FL-SD365IV
Brand Name : Fire-Lite Alarms by Honeywell
Connectivity Technology : Wired
Manufacturer : Honeywell International, Inc
Manufacturer Part Number : SD365-IV
Product Model : SD365-IV
Product Name : SD365-IV Smoke Detector
Product Series : SD365
Product Type : Smoke Detector
Weight (Approximate) (g) : 96.388
Technical Information
Addressable : Yes
Detectable Medium : Fire
Sensing Technology : Photoelectric
Sensor Type : Photoelectric
Commercial/Residential
Commercial/Residential : Residential
Controls/Indicators
Status Indicators : Alarm, LED
Physical Characteristics
Color : White
Diameter (mm) : 157.48
Form Factor : Ceiling Mount
Height : 2"
Height (mm) : 50.8
Weight (Approximate) : 3.40 oz
Power Description
Input Voltage : 32V DC
Input Voltage (V DC) : 32
Product Information
Diameter : 6.2"
