Altronix AL1024NK8D converts a 115 VAC 60 Hz input into eight PTC protected 12 VDC or 24 VDC outputs with a total of 10 A max. Dual input design allows power to be steered from two factory installed independent low voltage 12 or 24 VDC Altronix power supplies to eight independently controlled PTC protected outputs.FeaturesAL1024ULXB2 Power Supply/ChargerInputVoltage: 115 VAC, 60 Hz, 4.2A maxInput Fuse: 5 A/250 VOutputsVoltage: 24 VDCCurrent: 10 A at 24 VDC continuous maxProtection: Overvoltage protection. Filtered and regulatedBattery Backup (not included)Capacity: 12 AH/12 VDC (2 within enclosure); 40 AH/65 AH (requires separate enclosure)Type: Sealed lead acid or gel typeFailover: Upon AC loss, instantaneousSupervisionAC Failure: Form C contactsBattery: Form C contactsIndicators LEDInput: 115 VAC is presentDC Output: PoweredBattery: Discharged or not connectedPDS8CB Dual Input Power Distribution ModuleInputVoltage: 12 VDC or 5 VDC from VR6 and 24 VDC from AL1024ULXB2Input PTCs: 9AOutputsVoltage: 12 VDC or 24 VDC individually selectableAny of the eight PTC protected power outputs are selectable to follow power Input 1 or Input 2Individual outputs may be set to OFF position for servicingOutputs RatingsPTCs: 2.5Indicators (LED)Out1 - Out8: Bi-colored LEDs indicate 12 or 24VDCVR6 Voltage RegulatorInputVoltage: 24 VDC from AL1024ULXB2OutputVoltage: 12 VDCCurrent: 6 A continuousOther: Surge suppressionIndicators LEDInput: 24 VDC is presentOutput: PoweredEnvironmentalTemperatureOperating: 0° C to 49° C (32° F to 120° F)Storage: - 20° C to 70° C ( - 4° F to 158° F)Relative HumidityRelative Humidity 85% +/- 5%BTU/Hr (approx.):123 BTU/Hr