Altronix AL600ULM Access Power Distribution Module w/ Power Supply/Charger, Five PTC Class-2 Outputs, 12/24VDC at 6A, BC300 Enclosure
Brand: Altronix- 5 PTC Class 2 Outputs
- Short circuit and thermal overload protection.
- Filtered and electronically regulated output.
Product Overview
Altronix M series access control power supply/chargers are specifically designed for use with access control systems and accessories. These units convert a 115VAC, 60Hz input into five (5) individually protected 12VDC or 24VDC outputs (see specifications). Each output will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. These outputs will operate in both Fail-Safe and Fail-Secure modes. Controlled trigger input is achieved through normally open [NO] or normally closed [NC] supervised input or the polarity reversal from an FACP (Fire Alarm Control Panel). A form “C” dry output relay enables HVAC Shutdown, Elevator Recall or may be used to trigger auxiliary devices.
- Fire Alarm Panel or Access Control System trigger inputs. [NO] or [NC] supervised trigger input and polarity reversal trigger input (4mA draw from FACP).
- Five (5) individual power-limited Class 2 outputs (auto-resettable).
- Filtered and electronically regulated outputs.
- Thermal and short circuit protection with auto reset.
- Overload protection.
- Output relay energizes when unit is triggered (form “C” contact rated 1A @ 28VDC).
- Supervision: - AC Fail - Battery Fail and Battery Presence
- Built-in charger for sealed lead acid or gel type batteries
- Instantaneous transfer to stand-by batteries
- Power and input trigger LEDs.
General Information
Name : Altronix AL600ULM Access Power Distribution Module w/ Power Supply/Charger, Five PTC Class-2 Outputs, 12/24VDC at 6A, BC300 Enclosure , AltronixCategory : Power Supplies
UPC Code : 782239930852
Country of Origin : United States. Country of origin is subject to change.