The GSA-CT1 Single Input Module and GSA-CT2/GSA-MCT2 Dual Input Modules are intelligent analog addressable devices used to connect one or two Class B normally-open Alarm, Supervisory, or Monitor type dry contact Initiating Device Circuits (IDC).
The actual function of these modules is determined by the "personality code" selected by the installer. This code is downloaded to the module from the Signature loop controller during system configuration.
The input modules gather analog information from the initiating devices connected to them and convert it into digital signals. The module's on-board microprocessor analyzes the signal and decides whether or not to input an alarm.
The GSA-CT1 mount to standard North American 1-gang electrical boxes, making them ideal for locations where only one module is required. Separate I/O and data loop connections are made to each module.
- Multiple applications
- GSA-CT1HT rated for high temperature environments
- Plug-in (UIO) or standard 1-gang mount
- Automatic device mapping
- Electronic addressing
- Stand-alone operation
- Ground fault detection by address
Name : Kidde GSA-CT1 Single Input Module - UL/ULC Listed , Kidde
Category : Control Panel Modules
UPC Code : 793017002005
Country of Origin : Mexico. Country of origin is subject to change.
ADI Part Number : ED-GSACT1
Brand Name : Kidde
Manufacturer : Kidde Fire and Safety
Manufacturer Part Number : GSA-CT1
Product Model : GSA-CT1
Product Name : Single Input Module - UL/ULC Listed
Product Type : Alarm Control Panel Expansion Module
Device Supported : Control Panel
Input Voltage : 19 V DC
Input Voltage (V DC) : 19
Certifications & Standards : <ul> <li>UL</li> <li>ULC</li> <li>MEA</li> <li>CSFM</li> </ul>