Please upgrade to the new Edge browser, or use Chrome, Firefox or Safari, before continuing. Internet Explorer will not support the best shopping experience on the ADI Digital Branch site after March 12.
Viking's K-2000-DVA is a fully programmable multi-input, multinumber auto dialer and digital announcer, designed for emergency and non-emergency message notification. The K-2000- DVA has eight dry contact inputs, each of which can dial up to eight 32-digit phone numbers and play a message up to 1 minute in length specific to that input.
General Information
Name: Viking Electronics Voice Alarm Dialing or Store Caster Announcements from up to Eight Inputs, Viking Electronics, Inc, Viking Electronics
Category: Viking Electronics, Access Control & Communications, Communication Accessories, Communications
UPC Code: 615687221237
Country of origin: United States. Country of origin is subject to change.
Specifications
General Information
ADI Part Number
VK-K2000DVA
Brand Name
Viking Electronics
Manufacturer
Viking Electronics, Inc
Manufacturer Part Number
K2000DVA
Packaged Quantity
1
Product Model
K-2000-DVA
Product Name
Voice Alarm Dialing or Store Caster Announcements from up to Eight Inputs
Product Type
Communication Module
Technical Information
Device Supported
Alarm Communicator
Power Description
Input Voltage
12 V DC
Miscellaneous
Additional Information
Non-volatile memory (no batteries required)
Stores up to eight 32-digit numbers (sixty four 32-digit numbers total)
8 minutes of record time (1 minute per input)
Programmable message repeat counter
Programmable lap counter
Eight inputs programmable as normally open or normally closed and enabled or disabled
Programmable ring delay for remote programming and alarm polling
Programmable qualifier timer for each input (time for an event to be qualified as an alarm)
Programmable resume timer for each input (time following reset for input to become active again)
Call progress detection
Programmable ringback limit for call progress
Remote security and access codes
Store caster mode
Local or remote programming and recording
RS-232 port for programming via a PC
Compatible with the RC-2A and RC-3 remote DTMF controllers