Product Overview
The U22-160-DP extends your host PC's USB 2.0 port across a single Cat5e/6 cable to 50 meters (165 ft) with data rates up to 480 Mb/s.
In most instances, no power supply is needed for either side as the local (host) side gets its power from the PC and it sends PoC (Power-over-Cable) to the remote (device) side. However for convenience a power supply is included that can be plugged in to the remote end for power hungry USB devices. The local side is in a convenient single-gang Decora® wall-plate. The remote end has a two port hub built-in to allow connection of 2 USB Devices. The U22-160-DP is a perfect solution for industrial and commercial applications.
This product can be used to extend a broad range of USB devices like webcams, printers, keyboards, and disk drives up to 165 ft (50 m) using single Cat 5/6 cable.
General Information
Name : Hall U22-160-DP USB 2.0 over UTP Extender Decora Wall Plate with 2-Port Hub , Hall Technologies
Category : USB Hubs
UPC Code : 724696530268
Country of Origin : Taiwan. Country of origin is subject to change.
Specifications
General Information
ADI Part Number : HH-U22160DP
Brand Name : Hall
Connectivity Technology : wired
Manufacturer : Hall Technologies
Manufacturer Part Number : U22-160-DP
Product Model : U22-160-DP
Product Name : U22-160-DP USB 2.0 over UTP Extender Decora Wall Plate with 2-Port Hub
Product Type : Video Extender Transmitter/Receiver
Receiver Weight (Approximate) (g) : 544
Transmitter Weight (Approximate) (g) : 544
Technical Information
Maximum Operating Distance : 165'
Media Type Supported : Twisted Pair
Number of Input Devices Supported : 1
Number of Output Devices Supported : 1
USB : Yes
Interfaces/Ports
Network (RJ-45) : Yes
Number of Network (RJ-45) Ports : 2
Number of USB Ports : 3
Media & Performance
Maximum Operating Distance (mm) : 50292
Twisted Pair Cable Standard : Category 6
Physical Characteristics
Form Factor : Wall Plate
Receiver Weight (Approximate) : 1.20 lb
Transmitter Weight (Approximate) : 1.20 lb
Miscellaneous
Package Contents : <ul> <li>1 x Transmitter</li> <li>1 x Receiver</li> <li>Power Supply</li> </ul>
