Tool installation kit for terminating RJ-45 modular plugs to twisted pair cable Includes FT-45™ Feed-Thru Modular Plug Crimp Tool (30-495), PrepPRO® stripper (45-605), scissors (35-088) and pouch with clip Crimps standard, Feed-Thru and shielded CAT5e, CAT6 and CAT6A modular plugs Spare slot in pouch to hold 35-485 Punch Down Tool The 33-507 Feed-Thru RJ-45 installation kit includes the necessary tools to cut, strip and terminate RJ-45, 8P8C modular plugs to twisted pair cabling. The tools in the kit are designed to work together with CAT5e, CAT6 and CAT6A cabling. The FT-45™ crimp tool is a compact, lightweight crimper that provides a flush cut on IDEAL Feed-Thru modular plugs. It is also compatible with standard (non-Feed-Thru) and shielded connectors. The PrepPRO stripper utilizes a fixed depth blade to score the jacket of twisted pair cable without nicking the inner conductors. Scissors are included for cutting off old connector ends and trimming the cable or conductors to size. The pouch includes a clip to attach the kit to a tool bag or belt and keeps the termination tools together in one compact space. A spare slot is included to add the 35-485 Punch Down Tool, or other similar shaped tool to the kit. The small round slot can be used to hold additional Punch Down tool blades. As an upgrade, the 33-508 includes all the above plus the Punchmaster™ II Punch Down Tool with 110 and 66 blades for the added benefit of terminating modular jacks and panels.