Product Overview
For heavy duty projects requiring added holding power!
Accepts any 1" (25.4mm) diameter shaft. Recent engineering changes allows the 400 base to hold up to 75lbs (34.0kg) at 45°.
- Allows the 400 Base to support weights up to 75 lbs. (34.0kg) at 45"
- Recommended for use with the 437 Heavy Duty Fixturing Head
- Accepts any 1" (25.4mm) diameter shaft to a depth of 1.7" (43.2mm)
- Single knob controls head movement through 3-planes: 90° Tilt, 360° Turn & 360° Rotation
- Square base has a foot print of 4.09"x 4.09" (103.62mm x 103.62mm and has four 0.38" (9.65mm) mounting holes (mounting screws not included)
- Mounting holes measure 2.875" (22.225mm) square
- A hole is provided in the bottom of the base for a 1/4-20 flat head screw to permanently attach any shaft
- Height: 3.25" (82.5mm)
- Weight: 1.5 lbs. (0.7kg)
General Information
Name : PanaVise 400 Heavy Duty Base , PanaVise
Category : Clips & Clamps
UPC Code :
Country of Origin : United States. Country of origin is subject to change.
Specifications
General Information
ADI Part Number : PN-400
Brand Name : PanaVise
Manufacturer : PanaVise Products, Inc
Manufacturer Part Number : 400
Product Model : 400
Product Name : Model: 400 Heavy Duty Base
Product Type : Mounting Base
Weight (Approximate) (g) : 680.389
Technical Information
Device Supported : Fixturing Head
Maximum Load Capacity : 75 lb
Maximum Load Capacity (g) : 34019.428
Physical Characteristics
Height : 3.2"
Height (mm) : 81.28
Weight (Approximate) : 1.50 lb
Warranty
Limited Warranty : Lifetime
Miscellaneous
Features : 360° Rotation, 90° Tilt, Heavy Duty
