Altronix T2MK7716 kit consists of Trove2 enclosure, TM2 Altronix and Mercury backplane and TMV2 door backplane with two 24 VDC at 10 A power supply/chargers, 12 VDC voltage regulator, eight fuse protected output dual voltage power distribution module and two eight fuse protected output access control modules. This kit also accommodates various combinations of Mercury boards for up to sixteen doors in a single enclosure. Trove simplifies board layout and wire management, reduces installation time and labor costs. Also compatible with these authentic Mercury partners: AccessNsite, Avigilon, BadgePass, BluBox, Feenics, Genetec, Identicard, IMRON, Johnson Controls, Kastle, Keri Systems, Lenel/S2, LockState, Maxxess, Midpoint Security, NLSS, Open Options, Panasonic Video Insight, Quintron, RS2, Schneider Electric, Vanderbilt.FeaturesTwo AL1024ULXB2 Power Supply/Charger InputVoltage: 115 VAC 60 Hz, 4.2 A maxMain Fuse: 5 A/250 VOutputsVoltage: 24 VDCCurrent: 10 A at 24 VDC continuous maxOther: Overvoltage protection. Filtered and regulatedBattery Backup (not included)Capacity: 12 AH/12 VDC (2 within enclosure), 40 AH / 65 AH (requires separate enclosure)Type: Sealed lead acid or gel typeFailover: Upon AC loss, instantaneousSupervisionAC Failure: Form C contactsBattery: Form C contactsIndicators LEDInput: 115 VAC is presentDC Output: PoweredBattery: Discharged or not connectedPDS8 Dual Input Power Distribution Module InputVoltage: 12 VDC from VR6 and 24 VDC from AL1024ULXB2Input Fuse: 10 A/32 VOutputsVoltage: 12 and/or 24VDCAny of the eight power outputs are selectable to follow power Input 1 or Input 2Individual outputs may be set to OFF position for servicingOutputs Ratings Fuses: 3 A/32 VIndicators LEDDC Output: Eight individual output LEDsGreen: 12 VDCRed: 24 VDCVR6 Voltage Regulator InputVoltage: 24 VDC from AL1024ULXB2OutputVoltage: 12 VDCCurrent: 6 A continuousOther: Surge suppressionIndicators LEDInput: 24 VDC is presentOutput: PoweredTwo ACM8 Access Power Controllers InputVoltage: 24 VDC from AL1024ULXB2Input Fuse: 10 A/250VOutputsVoltage: 24 VDCEight independently controlled fused outputs:a) Fail-Safe and/or Fail-Secure power outputs. Form C Relays rated 28 VAC or VDC at 2.5A.b) Auxiliary power outputs (unswitched).c) Any combination of the aboveOutput Fuses: 3.5 A/250 VIndicators (LED)Red LEDs: Outputs are triggered (relays energized)Green LED: FACP disconnect is triggeredEnvironmental TemperatureOperating: 0° C to 49° C (32° F to 120° F)Storage: - 20° C to 70° C ( - 4° F to 158° F)Relative HumidityRelative Humidity 85% +/- 5%BTU/Hr (approx.):289 BTU/Hr