The XTO 640 alarm panel is a Videofied® weatherproof, wireless, battery operated security system. The control panel is designed for outdoor commercial applications (constructions sites, cellular towers, remote sites, substations...).

The box is water-resistant and temperature-resistant. The control panel is powered by 4 LSH20 Lithium batteries that last up to four years, with normal system activity. A dual-tamper function is active 24 hours, whether or not the system is armed. An alarm occurs if the control panel cover is removed, or if the control panel is removed from the mounting surface. The user can arm and disarm the system by entering his code on the external keypad. A radio antenna is built in the system.

Features

• Wiselink® : Spread Spectrum, Videofied, Interactive AES Encrypted Wireless technology provides optimum signal integrity and security.
• Compatibility : works with all Videofied® wireless devices. S
• Supervision of all devices (except remote keyfob).
• Tamper detection : 24-hour dual-tamper function provides detection for both cover and wall removal. Control panel also monitors all system device tamper switches.
• Zones / Devices : 25 maximum.
• Areas : 4 maximum. Area 1 predefined from factory for entry/exit delay. Areas 2, 3, and 4 can be configured as needed.
• Access codes : 20 maximum, 4 - 6 digits; one installer access code for on-site programming only.
• Configuration/Programming : on-site using alphanumeric keypads.
• Communication : reports to central monitoring stations using Frontel.
• Video verification : video resolution of 320 x 240 pixels, 0 lux sensitivity, 5-frames per second for approx. 10 seconds total recording time. 220K MPEG file.
• History/Event Log : maximum 4,000 events stored in flash memory that cannot be cleared or erased