Product Overview
This is a reflective infrared sensor that can be installed with one-side wiring saves installation time and cost. As wiring is needed only on the sensor unit (one side), you can use it in places where it is difficult to wire on both sides. One-side wiring reduces time and cost of installation significantly.
This sensor can be used both indoor and outdoor. 2 types of attenuation sheets (for indoor and outdoor) are attached. Beam alignment can be adjusted on the sensor unit side only by utilizing viewfinder, attached attenuation sheets and alarm LED. It has a unique ambient light compensation circuit and special filters to obtain a strong immunity to ambient light such as sunlight, vehicle headlights and mercury light. Using the adjustments, the lens can move horizontally (±90 degrees) and vertically (±10 degrees) allowing the unit to work in all directions. Response time can be adjusted by the response time adjustment potentiometer. (0.05~0.7 sec.) Operation check can be done quickly with alarm LED (red).
General Information
Name : Takex PR-11B Photoelectric Beam Sensor, 36' Outdoor/Indoor Reflective Beam, N/O and N/C Relay, 10.5 to 30V DC, 49' indoors , Takex America
Category : Photoelectric Beam Detectors
UPC Code : 100000901199
Country of Origin : Japan. Country of origin is subject to change.
Specifications
General Information
ADI Part Number : PU-PR11BE
Brand Name : Takex
Manufacturer : TAKEX America, Inc
Manufacturer Part Number : PR-11BE
Product Model : PR-11BE
Product Name : Photoelectric Beam Sensor
Product Type : Photoelectric Beam Detector
Weight (Approximate) (g) : 430
Technical Information
Connectivity Technology : wired
Horizontal Adjustment : 90°
Material : Resin
Maximum Indoor Detection Range : 49' (14935.20 mm)
Maximum Indoor Detection Range (mm) : 14935.2
Maximum Outdoor Detection Range : 36'
Maximum Outdoor Detection Range (mm) : 10972.8
Maximum Response Time : 700 ms
Maximum Response Time (Second) : 0.7
Vertical Adjustment : 10°
Physical Characteristics
Color : Red
Form Factor : Pole Mount, Wall Mount
Weight (Approximate) : 15.17 oz
Power Description
Input Voltage : 30V DC
Input Voltage (V DC) : 30
Product Information
Mount Type : Pole Mount, Wall Mount
