Product Overview
The front panel of the D-RC2ST features two pushbuttons with two associated LEDs. Upon initial power-up, source 1 is selected. Touching the other button de-selects source 1 and immediately selects source 2. An LED adjacent to each button shows which source is selected.
In a typical installation, the D-RC2ST may be used to select between two audio or video sources, or to route audio to two destinations. To select between two audio sources, the D-RC2ST is connected to an RDL ST-SSR1 Solid-State Audio Switch. For video switching, an RDL TX-MVX may be used. For audio routing, an RDL ST-RX2 is used. In each of the above examples, only one output terminal is needed for triggering. Therefore a single shielded pair (or 3-conductor cable) is required for remote connection. For more complex switching networks, both outputs may be used.
General Information
Name : RDL D-RC2ST Series 2-Channel Remote Control for STICK-ON Audio or Video Sources, White , Radio Design Labs
Category : Video Conference Controllers
UPC Code : 813721015563
Country of Origin : United States. Country of origin is subject to change.
Specifications
General Information
ADI Part Number : RL-DRC2ST
Brand Name : RDL
Manufacturer : Radio Design Labs, Inc
Manufacturer Part Number : D-RC2ST
Product Line : D
Product Model : D-RC2ST
Product Name : 2 Channel Remote Control for STICK-ON-Remote Selection of Audio or Video Sources
Product Series : D
Product Type : A/V Control Panel
Technical Information
Number of Devices Controlled : 2
Power Consumption : 24V DC
Audio
Shipping Weight (Approximate) (g) : 165.56
Physical Characteristics
Color : white
Depth : 1.66"
Depth (mm) : 42.164
Form Factor : Electrical Box
Height : 4.11"
Height (mm) : 103
Package Type : Cardboard Box
Shipping Weight (Approximate) : 0.365 lb
Width : 1.72"
Width (mm) : 43.688
Miscellaneous
Compatibility : RDL® Remote Controls
