The eFlow102NB power supply/charger converts a 115 VAC/60 Hz input to a 12 VDC at 10 A output.

Features

• Input 120 VAC 60 Hz, 3.5 A
• 12 VDC output
• 10 A continuous supply current
• Aux. power-limited output rated at 1 A (unswitched)
• Over Voltage Protection
• Filtered and electronically regulated outputs
• Built-in charger for sealed lead acid or gel type batteries
• Maximum charge current 1.54 A
• Automatic switch over to stand-by battery when AC fails
• Transfer to stand-by battery power is instantaneous with no interruption
• Supervised Fire Alarm disconnect (latching or nonlatching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger
• AC fail supervision (form C contacts)
• Battery fail and presence supervision (form C contacts)
• Low power shutdown. Shuts down DC output terminals if battery voltage drops below 80% of nominal. Prevents deep battery discharge
• Green AC Power LED indicates 120 VAC present
• AC input and DC output LED indicators
• Short circuit and overload protection