TVR10/100/1000 LAN Tester is comprised of a "Main unit" and a "Remote Probe". The Main unit performs the bulk of the tests, such as determining the LAN device type (is it a hub/switch or PC?), the LAN speed and duplex (10, 100, 1000 MB/s, half or full duplex) and whether PoE (Power over Ethernet) is present without the need of the Remote Probe. The Remote Probe adds the ability to trace cable locations (by audibly tracing tones placed on the cable by the Main Unit) and to test the wiring of the cable (by decoding and displaying wiring information placed on the cable by the Main Unit).

Kit Includes:

• Main Unit
• Remote Probe Unit
• Set of Batteries
• RJ45 to RJ45 Jumpers
• Protective Pouch
• Manual

Main Features

• Ideal solution for testing, verifying, and repairing 10, 100, and 1000 Base-T Networks
• Consists of Main unit and Remote Probe
• Main unit plugs into active hubs, switches and PCs to verify 10, 100 or 1000 Base-T operation
• Instantly displays:
  • Device type (hub/switch or PC)
  • Speed (10, 100, 1000 MB/s)
  • Duplex of link (half, full)
  • PoE detection (end span, mid span)
• Connects inline between two LAN devices to determine final negotiated speed and duplex of the link
• Verifies which cable pairs are wired and whether they are straight thru or crossover
• Tests for existence of LAN device connected at end of cable
• Locates faulty hubs, switches, PCs, cables, and cable connections that affect LAN performance
• Remote probe traces cable locations by detecting tone generated by Main unit
• Straight thru/crossover cable simulator indicates type of patch cable required