The IPCOAX1 is a single channel IP Camera and PoE plus Surge Protector with an independent protection circuit for 12 or 24V power, for applications where heater units or higher power PTZ units may be required. The IPCOAX1 is an in-line, IP over Coax network surge protector for 10/100 or Gigabit network devices with a separate input for 12 or 24 VAc or DC power. The IPCOAX1 IP Ethernet over Coax Surge Protector is designed to provide surge protection for one network port. The unit has female BNC connectors at the input and output to protect the network cable and push-in terminals for the 12-24V supply. The COAX1 is ideally suited for small or restricted spaces when network protection is needed. The unit provides a heavy, single point ground connection and is easy to install in minutes. The IPCOAX1 is recommended for use with the Etherstretch™ family of products to provide IP network and PoE plus protection. The IPCOAX1 is covered by a Lifetime limited Warranty.
Name : Nitek IPCOAX1 IP Camera Surge Protector, In-Line, Ethernet over Coax, 1-Channel, 12/24 Volt AC/DC, 50/75 Ohm, 2.5" Width x 1.8" Depth x 0.9" Height , Nitek
Category : Surge Protection Modules
UPC Code : 661955001001
Country of Origin : United States. Country of origin is subject to change.
ADI Part Number : N1-IPCOAX1
Brand Name : NITEK
Manufacturer : Northern Information Technology, Inc
Manufacturer Part Number : IPCOAX1
Product Model : IPCOAX1
Product Name : IP Ethernet over Coax Surge Protector - Single Channel
Product Type : Surge Suppressor/Protector
Dataline Protection : Coaxial Cable Line
Receptacles : BNC
Depth : 1.8"
Depth (mm) : 45.72
Height : 0.9"
Height (mm) : 22.86
Width : 2.5"
Width (mm) : 63.5
Input Voltage : 24V
Limited Warranty : Lifetime
Environmental Certification : RoHS
Environmentally Friendly : Yes