content loaded
RMS Output Power: 250W
RMS Output Power: 250W
Key Features
What's Included
- 125W & 250W models
- Designed for continuous operation at rated power, up to 120 deg. F; convection-cooled
- Thermal protection and automatic electronic overload protection
Key Features
What's Included
- 125W & 250W models
- Designed for continuous operation at rated power, up to 120 deg. F; convection-cooled
- Thermal protection and automatic electronic overload protection
Sign In for Dealer Pricing
Become an ADI CustomerKey Features
What's Included
- 125W & 250W models
- Designed for continuous operation at rated power, up to 120 deg. F; convection-cooled
- Thermal protection and automatic electronic overload protection
Please sign in to view pricing and availability and to add to cart.
Overview
Specifications
Documents
Product Overview
The Bogen HTA-Series Power Amplifiers are high performance units employing Power MOSFET technology. The unique characteristics of Power MOSFET circuitry make them ideally suited to power amplifier design, providing far superior performance and reliability compared to other types of transistors. They offer higher efficiency, reduced heat, simpler overall design, reduced size and weight. The HTA125A Model supplies 125 watts and the HTA250A Model supplies 250 watts (RMS continuous output) at less than 0.5% total harmonic distortion from 20 to 20,000 Hz. An input signal of only 500mV is required for full rated output. The input impedances are: high-impedance (50k ohms) unbalanced; and low impedance (500/600 ohms, balanced or unbalanced) using the WMT1A Line-Matching Transformer accessory. Line bridging can be achieved with the optional transformer Model TL100. Residual hum and noise is at least 90 dB below rated output and the output regulation is better than 2 dB from no load to full load. The amps can drive a variety of load impedances. Outputs include 4 ohms, 8 ohms, 25VCT and 70 volts. The amplifiers are capable of safely driving any recommended load continuously. The HTA-Series amps are thermally protected to prevent damage due to excessively high temperatures. Additional failure-preventive devices include overload limiting, short circuit protection, and a SloBlo fuse. Electronic shutdown circuitry is automatically activated if an overload or short occurs and the front panel overload shutdown LED illuminates. Once the cause has been rectified, the unit automatically resets. The power ON/OFF switch, located on the front panel, illuminates when power is on. The rear panel contains an input level control, input and output connections, the AC line fuse, and an auxiliary receptacle. A low-cut filter switch is located internally.
Main Features
- 125W & 250W models
- Designed for continuous operation at rated power, up to 120 deg. F; convection-cooled
- Thermal protection and automatic electronic overload protection
- Hi-Z unbalanced and Lo-Z balanced or unbalanced input w/ accessory transformer (WMT1A)
- 4-ohm, 8-ohm, 25V, & 70V outputs
- Automatic overload protection
- Listed to UL Standard 60065 for US and Canada
General Information
Name: Bogen HTA250A HTA-Series Mono-Channel Power Amplifier, 250W
Category: Bogen, Pro AV, Commercial Audio, Pro Amplifiers
UPC Code: 765368350173
Country of Origin: Taiwan. Country of origin is subject to change.
Specifications
-
ADI Part Number BO-HTA250A Brand Name Bogen Manufacturer Bogen Communications International, Inc Manufacturer Part Number HTA250A Product Model HTA250A Product Name HTA250A Power Amplifier Product Series HTA Product Type Amplifier Weight 50 lb
-
Audio Channels 1 Impedance 8 ohms
-
Maximum Frequency Response 20 kHz Minimum Frequency Response 20 Hz RMS Output Power 250W Total Harmonic Distortion (THD) 0.5%
-
TAA Compliant No
-
Color Black Depth 11" Height 5.2" Width 19"
-
Input Voltage 120V AC
-
Limited Warranty 2-Year
-
Country of Origin TW Features Automatic overload protection, Capable of continuous operation at rated output power, Listed to UL Standard 60065 for US and Canada, Multiple output voltages/impedances available, Power MOSFET circuitry Package Contents - HTA250A Power Amplifier
- 1:1 line-matching transformer
- Line-matching transformer